Furman AIS-10

Description

The AIS-10 Audio Interface System is a two-channel line level router and microphone preamp designed to assist in making accurate acoustical measurements using compuert_based analyzer software systems (e.g. SmaartLive (TM) from SIA Software Company, Inc.). The AIS-10 is extremely compact (4.5" W x 2" H x 3" D) and fits easily into a laptop case. The front panel controls include a microphone gain control, a 48 volt phantom power switch, a reference line level input (EQ IN) control, a measurement line level input (EQ OUT) control, and a switch to select between the microphone or the line level input on the measurement channel. There is also a dual ganged output level control. The AIS-10 is AC powered using a 12 volt 500 mA external power supply. THe mixer outputs to your computer are unbalanced RCA jacks. THree balanced XLR connectors are provided for microphone and line inputs. The AIS-10 is the result of collaboration of industry professionals with a deep commitment to providing top quality and highly useful pro-sound products. This product is the first in a series that is aimed specifically at the live sound and touring market segment.

Warranty

The Interfacing Technologies AIS-10 is protected by a three-year limited warranty covering defects in materials and workmanship.

Features

Durable, compact design
Replaces seperate microphone preamplifier and mixer
Level controls optimized for measurement systems
Extremely low distortion and noise
Wide frequency response
Low phase shift
Three-year limited warranty

Specification:

LINE INPUTS TO LINE OUTPUTS:

Input Impedance:
24k Ohms

Common mode rejection:
90 dB

Maximum input:
+28.5 Dbu

Maximum output:
22 dBu

Frequency response:
+0, -0.5 dB, 10 Hz to 70 kHz

Phase +/-10 deg.:
10 Hz to 50 kHz

THD + noise:
0.0006%, 20 Hz to 20kHz, +10 dBu input/output

Noise:
-98 dBu, 20 Hz to 22kHz

MICROPHONE INPUT TO LINE OUTPUTS:

Input impedance:
8k Ohms

Common mode rejection:
60 dB to 100dB

Maximum input:
+15.5 dBu

Gain:
+13 dB to +64 dB

Frequency response (40 dB):
+0, -0.5 dB, 10 Hz to 100kHz

Phantom supply:
+48 volts +/- 10%, 10 mA

THD + noise:
<0.001% 20 Hz to 20 kHz +10dBu input, +10 dBu output

E.I.N, 50 Ohm source:
-131 dB 20 Hz to 22 kHz