Azden APS 25b
Product Description:
The new Azden APS 25b battery powered speaker is designed to be as versatile as possible: wireless or wired, expandable, wall or stand-mounted, and built for absolute reliability-so you could cover the broadest spectrum of audio installations.Incorporating a 20 watt amplifier, the APS25b is a rugged, 2-way speaker with a 5.25" shielded woofer and a 1" wide-dispersion tweeter that produces clear detailed sound for all corporate, educational and commercial applications.Only the APS25b offers you the ability to include UHF, VHF or Infrared wireless microphone modules. And, you can use either one or two modules, initially or later on. You can order the speaker in any number of configurations and add it in the future. With 30 VHF frequency modules, 63 channel user-selectable UHF modules or Infrared wireless, you can have multiple systems in one venue without interference.The APS25b includes a Master Volume control and Tone control to reduce feedback. Individual level controls for each of the four inputs- two wireless, one wired mic level, and one line level-giving you more ways to configure your system. The speaker's variable line level output lets you daisy chain multiple speakers. The high gain mic input shorts automatically to reduce noise when no mic is plugged in.Included with the APS25b is the Auto On-Off circuitry triggered by any audio input signal for hands-off system startup; a high impact case for reliability, and an internal re-chargeable battery that can operate the speaker for up to 8 hours. The speaker can be used free standing, stand-mounted (5/8x27 threaded holes on the bottom and side) or wall-mounted with the supplied U-mount bracket.
Product Specifications:
| Rated Power | 20 Watts continuous | |||||||||||||||||||||||||||||
| Frequency Response | 65Hz – 18kHz | |||||||||||||||||||||||||||||
| Max SPL @ Rated Output | 101db @ 1 meter | |||||||||||||||||||||||||||||
| Woofer | 5.25" (133.35mm) high efficiency - magnetically shielded | |||||||||||||||||||||||||||||
| Tweeter | 1" (25mm) dome | |||||||||||||||||||||||||||||
| Crossover | 1st order passive @ 8kHz | |||||||||||||||||||||||||||||
| Tone Control | -6dB/octave sliding low pass (3kHz to 8kHz) | |||||||||||||||||||||||||||||
| Wireless Inputs | 2 user-installable receivers VHF (169-213mHz) – 30 fixed frequencies UHF (794-806mHz) – 63 user-selectable frequencies Infrared – 2 fixed frequencies | |||||||||||||||||||||||||||||
| Wired Inputs/Output | ||||||||||||||||||||||||||||||
| Mic | -81dBv (0.089mVRMS) for 1 watt, 100K balanced, ¼" phone jack, variable | |||||||||||||||||||||||||||||
| Line | -40dBv (10mVRMS) for 1 watt, 10K unbalanced, RCA jack, variable | |||||||||||||||||||||||||||||
| Line-Out | +15dBv max - RCA jack | |||||||||||||||||||||||||||||
| Weight (w/out receivers) | 11.35lb (5.15kg) approx. | |||||||||||||||||||||||||||||
| Dimensions | 12.4"H X 7.09"W X 5.6"D (315 X 180 X 142mm) | |||||||||||||||||||||||||||||
| AC Power Requirements | 110-125 / 60Hz for battery charger | |||||||||||||||||||||||||||||
| Included w/speaker | Removable wall-mount bracket with 2 screws, rubber anti-rotate pads,AC/DC battery charge pack, 4 self-adhesive anti-skid pads, 4 module screws, 1 or 2 noise-canceling circuit boards (depending on how many modules are installed) | |||||||||||||||||||||||||||||
| Weight | 16.00 lbs | |||||||||||||||||||||||||||||
| Options | ||||||||||||||||||||||||||||||
| Available Colors | Black, White |
Product Description:A single-channel VHF plug-in module (choose from 25 frequencies below) for the APS Powered Speaker System. Simply plug into the slot on the rear of the speaker.
|
| Receiver Technical Specs | |
| Frequency Range | 25 VHF channels (169.505-195.975MHz) |
| Frequency Response | 40Hz - 18kHz |
| S/N Ratio | better than 95dB (A weighted) |
| Operating Temperature Range | 0° - 45° C (32° - 113° F) |
| Operating Range | approx 100m (ideal-line of sight) |
| Oscillator | Crystal Controlled |
| Receiver Type | Super Heterodyne |
| Image Rejection | Better than 60dB |
| RF Sensitivity | -95dBm @ 50dB S/N |
| Audio Output Impedance | 2.2k ohms |
| Power Requirements | 10 - 16VDC |
| Weight | 1.00 lbs |
| Options | |
| Available Frequency (Choose one) | A1 (169.505 Travel),A3 (171.045 Travel),A4 (171.905 Travel),B1 (175.400 7),B2 (178.225 7),B3 (179.200 7),B4 (176.425 7),B5 (177.650 7),C1 (181.400 8),C2 (184.025 8),C3 (185.125 8),C4 (181.850 8),C5 (182.550 8),D1 (187.800 9),D2 (188.200 9),D3 (190.600 9),D4 (191.300 9),D5 (189.325 9),D6 (190.075 9),E1 (194.400 10),E2 (195.425 10),E3 (196.800 10),E4 (197.325 10),E5 (193.825 10),E6 (195.975 10) |
