INFRARED WIRELESS

Product Description:

The APS 25b-RH2 battery powered speaker system is a fully self-contained wireless sound reinforcement system with two infrared wireless handheld microphone/transmitters.Incorporating a 20 watt amplifier, the APS 25b is a rugged, 2-way speaker with a 5.25" shielded woofer and a 1" wide-dispersion tweeter that produces clear detailed sound for all corporate, educational and commercial applications.The APS 25b includes a Master Volume control and Tone control to reduce feedback. Individual level controls for each of the four inputs- two wireless, one wired mic level, and one line level-giving you more ways to configure your system. The speaker's variable line level output lets you daisy chain multiple speakers. The high gain mic input shorts automatically to reduce noise when no mic is plugged in.Included with the APS 25b is the Auto On-Off circuitry triggered by any audio input signal for hands-off system startup; a high impact case for reliability, and an internal rechargeable battery that can operate the speaker for up to 8 hours. The speaker can be used free standing, stand-mounted (5/8x27 threaded holes on the bottom and side) or wall-mounted with the supplied U-mount bracket.The APS 25b-RH2 includes two APS-IRII infrared receiver modules, two IRH-15c microphones and an IRD-30 external sensor with a special sensor interconnect cable.For pass-around, use the 2-channel IRH-15c infrared handheld uni-directional mic/transmitter. Multiple emitters around the base and near the mic element flood the room. An anti-roll ring around the mic head keeps the IRH-15c from rolling off a sloping lectern or school desk.

Product Specifications:

Speaker Technical Specs
Rated Power	20 Watts continuous
Frequency Response	65Hz – 18kHz
Max SPL @ Rated Output	101db @ 1 meter
Woofer	5.25" (133.35mm) high efficiency - magnetically shielded
Tweeter	1" (25mm) dome
Crossover	1st order passive @ 8kHz
Tone Control	-6dB/octave sliding low pass (3kHz to 8kHz)
Wireless Inputs	2 user-installable receivers VHF (169-213mHz) – 30 fixed frequencies UHF (794-806mHz) – 63 user-selectable frequencies Infrared – 2 fixed frequencies
Wired Inputs/Output
Mic	-81dBv (0.089mVRMS) for 1 watt, 100K balanced, ¼" phone jack, variable
Line	-40dBv (10mVRMS) for 1 watt, 10K unbalanced, RCA jack, variable
Line-Out	+15dBv max - RCA jack
Weight (w/out receivers)	11.35lb (5.15kg) approx.
Dimensions	12.4"H X 7.09"W X 5.6"D (315 X 180 X 142mm)
AC Power Requirements	110-125VAC - 60Hz
Included w/speaker	Removable wall-mount bracket with 2 screws, rubber anti-rotate pads, removable right-angle, AC cord, 4 self-adhesive anti-skid pads, 4 module screws, 1 or 2 noise-canceling circuit boards (depending on how many modules are installed)
Receiver Technical Specs
Sub-carrier frequencies	2.06MHz or 2.56MHz
Type	super heterodyne - crystal controlled
Modulation	FM
Signal-to -Noise	>90dB
Image rejection	>40dB
Reception sensitivity	>25dBµV
Reception selectivity	± 40kHz
Audio output adjustment	+4dB max
Audio output impedance	<1k ohms
Transmitter Technical Specs
Sub-carrier frequencies	2.06MHz & 2.56MHz switchable
Modulation	FM
Microphone element type	Uni-directional dynamic
Frequency Response	50-8kHz ±3dB
Battery type	2-“AA” alkaline( 1.5V x 2 ) or 2-“AA” rechargeable Ni-MH (1.2V x 2 )
Battery life	> 6 hours w/alkaline batteries
Size	9.65" x approx.1.375" (245 x approx. 35mm)
Weight (w/alkaline batteries)	9.1oz (258g)
Weight	19.00 lbs
Options
Available Colors	Black, White
Azden APS 25b-RL1 Product Description: The APS 25b-RL1 powered speaker system is a fully self-contained wireless sound reinforcement system with a single infrared wireless chest-worn transmitter.Incorporating a 20 watt amplifier, the APS 25b is a rugged, 2-way speaker with a 5.25" shielded woofer and a 1" wide-dispersion tweeter that produces clear detailed sound for all corporate, educational and commercial applications.The APS 25b includes a Master Volume control and Tone control to reduce feedback. Individual level controls for each of the four inputs- two wireless, one wired mic level, and one line level-giving you more ways to configure your system. The speaker's variable line level output lets you daisy chain multiple speakers. The high gain mic input shorts automatically to reduce noise when no mic is plugged in.Included with the APS 25b is the Auto On-Off circuitry triggered by any audio input signal for hands-off system startup; a high impact case for reliability, and an internal rechargeable battery that can operate the speaker for up to 8 hours. The speaker can be used free standing, stand-mounted (5/8x27 threaded holes on the bottom and side) or wall-mounted with the supplied U-mount bracket.The APS 25b-RL1 includes a APS-IRII infrared receiver module, an IRN-10 chest-worn transmitter with built-in emitter/mic and an IRD-30 external sensor. Product Specifications: REGULAR PRICE: $690.00 Our Low Sale Price: $621.00 Availability: Usually ships the next business day. Azden APS 25b-RL1 APS 25b-RL1 Speaker Technical Specs Rated Power 20 Watts continuous Frequency Response 65Hz – 18kHz Max SPL @ Rated Output 101db @ 1 meter Woofer 5.25" (133.35mm) high efficiency - magnetically shielded Tweeter 1" (25mm) dome Crossover 1st order passive @ 8kHz Tone Control -6dB/octave sliding low pass (3kHz to 8kHz) Wireless Inputs 2 user-installable receivers VHF (169-213mHz) – 30 fixed frequencies UHF (794-806mHz) – 63 user-selectable frequencies Infrared – 2 fixed frequencies Wired Inputs/Output Mic -81dBv (0.089mVRMS) for 1 watt, 100K balanced, ¼" phone jack, variable Line -40dBv (10mVRMS) for 1 watt, 10K unbalanced, RCA jack, variable Line-Out +15dBv max - RCA jack Weight (w/out receivers) 11.35lb (5.15kg) approx. Dimensions 12.4"H X 7.09"W X 5.6"D (315 X 180 X 142mm) AC Power Requirements 110-125VAC - 60Hz Included w/speaker Removable wall-mount bracket with 2 screws, rubber anti-rotate pads, AC/DC battery charge pack, 4 self-adhesive anti-skid pads, 4 module screws, 1 or 2 noise-canceling circuit boards (depending on how many modules are installed) Receiver Technical Specs Sub-carrier frequencies 2.06MHz or 2.56MHz Type super heterodyne - crystal controlled Modulation FM Signal-to -Noise >90dB Image rejection >40dB Reception sensitivity >25dBµV Reception selectivity ± 40kHz Audio output adjustment +4dB max Audio output impedance <1k ohms Transmitter Technical Specs Sub-carrier frequencies 2.06MHz & 2.56MHz switchable Modulation FM Microphone element type Uni-directional electret x 2 Frequency response 50-9kHz ±3dB Ext Mic input impedance 2.2k ohms Ext Mic input jack: 3.5mm Ext. Mic Voltage/Current 3.5VDC @ 1mA (to power electret mic element) Mic gain adjustment +6dB to approx. –10dB Battery type 2-“AA” alkaline( 1.5V x 2 ) or 2-“AA” rechargeable Ni-MH (1.2V x 2 ) Battery life > 8hours w/alkaline batteries Size 3.15" H x 2.75" W x 1.06" D (80 x 70 x 27mm) Weight (-w/alkaline batteries) 4.3oz (120g) Weight 17.00 lbs Options Available Colors Black, White Azden APS 25b-RL2 Product Description: The APS 25b-RL2 battery powered speaker system is a fully self-contained wireless sound reinforcement system with two infrared wireless chest-worn transmitters.Incorporating a 20 watt amplifier, the APS 25b is a rugged, 2-way speaker with a 5.25" shielded woofer and a 1" wide-dispersion tweeter that produces clear detailed sound for all corporate, educational and commercial applications.The APS 25b includes a Master Volume control and Tone control to reduce feedback. Individual level controls for each of the four inputs- two wireless, one wired mic level, and one line level-giving you more ways to configure your system. The speaker's variable line level output lets you daisy chain multiple speakers. The high gain mic input shorts automatically to reduce noise when no mic is plugged in. Included with the APS 25b is the Auto On-Off circuitry triggered by any audio input signal for hands-off system startup; a high impact case for reliability, and an internal re-chargeable battery that can operate the speaker for up to 8 hours. The speaker can be used free standing, stand-mounted (5/8x27 threaded holes on the bottom and side) or wall-mounted with the supplied U-mount bracket.The APS 25b-RL12 includes two APS-IRII infrared receiver modules, two IRN-10 chest-worn transmitters with emitter/mics and an IRD-30 external sensor. An included external emitter interconnect cable allows a single sensor to operate both receivers. Product Specifications: REGULAR PRICE: $1,075.00 Our Low Sale Price: $967.50 Availability: Usually ships the next business day. Azden APS 25b-RL2 APS 25b-RL2 Speaker Technical Specs Rated Power 20 Watts continuous Frequency Response 65Hz – 18kHz Max SPL @ Rated Output 101db @ 1 meter Woofer 5.25" (133.35mm) high efficiency - magnetically shielded Tweeter 1" (25mm) dome Crossover 1st order passive @ 8kHz Tone Control -6dB/octave sliding low pass (3kHz to 8kHz) Wireless Inputs 2 user-installable receivers VHF (169-213mHz) – 30 fixed frequencies UHF (794-806mHz) – 63 user-selectable frequencies Infrared – 2 fixed frequencies Wired Inputs/Output Mic -81dBv (0.089mVRMS) for 1 watt, 100K balanced, ¼" phone jack, variable Line -40dBv (10mVRMS) for 1 watt, 10K unbalanced, RCA jack, variable Line-Out +15dBv max - RCA jack Weight (w/out receivers) 11.35lb (5.15kg) approx. Dimensions 12.4"H X 7.09"W X 5.6"D (315 X 180 X 142mm) AC Power Requirements 110-125VAC - 60Hz Included w/speaker Removable wall-mount bracket with 2 screws, rubber anti-rotate pads, AC/DC battery charge pack, 4 self-adhesive anti-skid pads, 4 module screws, 1 or 2 noise-canceling circuit boards (depending on how many modules are installed) Receiver Technical Specs Sub-carrier frequencies 2.06MHz or 2.56MHz Type super heterodyne - crystal controlled Modulation FM Signal-to -Noise >90dB Image rejection >40dB Reception sensitivity >25dBµV Reception selectivity ± 40kHz Audio output adjustment +4dB max Audio output impedance <1k ohms Transmitter Technical Specs Sub-carrier frequencies 2.06MHz & 2.56MHz switchable Modulation FM Microphone element type Uni-directional electret x 2 Frequency response 50-9kHz ±3dB Ext Mic input impedance 2.2k ohms Ext Mic input jack: 3.5mm Ext. Mic Voltage/Current 3.5VDC @ 1mA (to power electret mic element) Mic gain adjustment +6dB to approx. –10dB Battery type 2-“AA” alkaline( 1.5V x 2 ) or 2-“AA” rechargeable Ni-MH (1.2V x 2 ) Battery life > 8hours w/alkaline batteries Size 3.15" H x 2.75" W x 1.06" D (80 x 70 x 27mm) Weight (w/alkaline batteries) 4.3oz (120g) Weight 19.00 lbs Options Available Colors Black, White Azden APS 25b-RS1 Product Description: The APS 25b-RS1 powered speaker system is a fully self-contained wireless sound reinforcement system with a single infrared wireless chest-worn transmitter and an HS-11 headset/mic.Incorporating a 20 watt amplifier, the APS 25b is a rugged, 2-way speaker with a 5.25" shielded woofer and a 1" wide-dispersion tweeter that produces clear detailed sound for all corporate, educational and commercial applications.The APS 25b includes a Master Volume control and Tone control to reduce feedback. Individual level controls for each of the four inputs- two wireless, one wired mic level, and one line level-giving you more ways to configure your system. The speaker's variable line level output lets you daisy chain multiple speakers. The high gain mic input shorts automatically to reduce noise when no mic is plugged in.Included with the APS 25b is the Auto On-Off circuitry triggered by any audio input signal for hands-off system startup; a high impact case for reliability, and an internal rechargeable battery thaty can operate the speaker for up to 8 hours. The speaker can be used free standing, stand-mounted (5/8x27 threaded holes on the bottom and side) or wall-mounted with the supplied U-mount bracket.The APS 25b-RS1 includes a APS-IRII infrared receiver module, an IRN-10 chest-worn transmitter with an HS-11 headset/mic and an IRD-30 external sensor. Product Specifications: REGULAR PRICE: $770.00 Our Low Sale Price: $693.00 Availability: Usually ships the next business day. Azden APS 25b-RS1 APS 25b-RS1 Speaker Technical Specs Rated Power 20 Watts continuous Frequency Response 65Hz – 18kHz Max SPL @ Rated Output 101db @ 1 meter Woofer 5.25" (133.35mm) high efficiency - magnetically shielded Tweeter 1" (25mm) dome Crossover 1st order passive @ 8kHz Tone Control -6dB/octave sliding low pass (3kHz to 8kHz) Wireless Inputs 2 user-installable receivers VHF (169-213mHz) – 30 fixed frequencies UHF (794-806mHz) – 63 user-selectable frequencies Infrared – 2 fixed frequencies Wired Inputs/Output Mic -81dBv (0.089mVRMS) for 1 watt, 100K balanced, ¼" phone jack, variable Line -40dBv (10mVRMS) for 1 watt, 10K unbalanced, RCA jack, variable Line-Out +15dBv max - RCA jack Weight (w/out receivers) 11.35lb (5.15kg) approx. Dimensions 12.4"H X 7.09"W X 5.6"D (315 X 180 X 142mm) AC Power Requirements 110-125VAC - 60Hz Included w/speaker Removable wall-mount bracket with 2 screws, rubber anti-rotate pads, AC/DC battery charge pack, 4 self-adhesive anti-skid pads, 4 module screws, 1 or 2 noise-canceling circuit boards (depending on how many modules are installed) Receiver Technical Specs Sub-carrier frequencies 2.06MHz or 2.56MHz Type super heterodyne - crystal controlled Modulation FM Signal-to -Noise >90dB Image rejection >40dB Reception sensitivity >25dBµV Reception selectivity ± 40kHz Audio output adjustment +4dB max Audio output impedance <1k ohms Transmitter Technical Specs Sub-carrier frequencies 2.06MHz & 2.56MHz switchable Modulation FM Microphone element type Uni-directional electret x 2 Frequency response 50-9kHz ±3dB Ext Mic input impedance 2.2k ohms Ext Mic input jack 3.5mm Ext. Mic Voltage/Current 3.5VDC @ 1mA (to power electret mic element) Mic gain adjustment +6dB to approx. –10dB Battery type 2-“AA” alkaline( 1.5V x 2 ) or 2-“AA” rechargeable Ni-MH (1.2V x 2 ) Battery life > 8hours w/alkaline batteries Size 3.15" H x 2.75" W x 1.06" D (80 x 70 x 27mm) Weight (w/alkaline batteries) 4.3oz (120g) (w/alkaline batteries) Weight 18.00 lbs Options Available Colors White, Black Azden APS 25b-RS2 Product Description: The APS 25b-RS2 battery powered speaker system is a fully self-contained wireless sound reinforcement system with two infrared wireless chest-worn transmitters and an HS-11 headset/mics.Incorporating a 20 watt amplifier, the APS 25b is a rugged, 2-way speaker with a 5.25" shielded woofer and a 1" wide-dispersion tweeter that produces clear detailed sound for all corporate, educational and commercial applications.The APS 25b includes a Master Volume control and Tone control to reduce feedback. Individual level controls for each of the four inputs- two wireless, one wired mic level, and one line level-giving you more ways to configure your system. The speaker's variable line level output lets you daisy chain multiple speakers. The high gain mic input shorts automatically to reduce noise when no mic is plugged in.Included with the APS 25b is the Auto On-Off circuitry triggered by any audio input signal for hands-off system startup; a high impact case for reliability, and an internal rechargeable battery that can operate the speaker for up to 8 hours. The speaker can be used free standing, stand-mounted (5/8x27 threaded holes on the bottom and side) or wall-mounted with the supplied U-mount bracket.The APS 25b-RS2 includes two APS-IRII infrared receiver modules, two IRN-10 chest-worn transmitters, two HS-121 headset/mics and an IRD-30 external sensor. An included external emitter interconnect cable allows a single sensor to operate both receivers Product Specifications: REGULAR PRICE: $1,220.00 Our Low Sale Price: $1,098.00 Availability: Usually ships the next business day. Azden APS 25b-RS2 APS 25b-RS2 Speaker Technical Specs Rated Power 20 Watts continuous Frequency Response 65Hz – 18kHz Max SPL @ Rated Output 101db @ 1 meter Woofer 5.25" (133.35mm) high efficiency - magnetically shielded Tweeter 1" (25mm) dome Crossover 1st order passive @ 8kHz Tone Control -6dB/octave sliding low pass (3kHz to 8kHz) Wireless Inputs 2 user-installable receivers VHF (169-213mHz) – 30 fixed frequencies UHF (794-806mHz) – 63 user-selectable frequencies Infrared – 2 fixed frequencies Wired Inputs/Output Mic -81dBv (0.089mVRMS) for 1 watt, 100K balanced, ¼" phone jack, variable Line -40dBv (10mVRMS) for 1 watt, 10K unbalanced, RCA jack, variable Line-Out +15dBv max - RCA jack Weight (w/out receivers) 11.35lb (5.15kg) approx. Dimensions 12.4"H X 7.09"W X 5.6"D (315 X 180 X 142mm) AC Power Requirements 110-125VAC - 60Hz Included w/speaker Removable wall-mount bracket with 2 screws, rubber anti-rotate pads, AC/DC battery charge pack, 4 self-adhesive anti-skid pads, 4 module screws, 1 or 2 noise-canceling circuit boards (depending on how many modules are installed) Receiver Technical Specs Sub-carrier frequencies 2.06MHz or 2.56MHz Type super heterodyne - crystal controlled Modulation FM Signal-to -Noise >90dB Image rejection >40dB Reception sensitivity >25dBµV Reception selectivity ± 40kHz Audio output adjustment +4dB max Audio output impedance <1k ohms Transmitter Technical Specs Sub-carrier frequencies 2.06MHz & 2.56MHz switchable Modulation FM Microphone element type Uni-directional electret x 2 Frequency response 50-9kHz ±3dB Ext Mic input impedance 2.2k ohms Ext Mic input jack 3.5mm Ext. Mic Voltage/Current 3.5VDC @ 1mA (to power electret mic element) Mic gain adjustment +6dB to approx. –10dB Battery type 2-“AA” alkaline( 1.5V x 2 ) or 2-“AA” rechargeable Ni-MH (1.2V x 2 ) Battery life > 8hours w/alkaline batteries Size 3.15" H x 2.75" W x 1.06" D (80 x 70 x 27mm) Weight (w/alkaline batteries) 4.3oz (120g) Weight 20.00 lbs Options Available Colors Black, White Azden APS 25-RH1 Product Description: The APS 25-RH1 powered speaker system is a fully self-contained wireless sound reinforcement system with a single infrared wireless handheld microphone/transmitter.Incorporating a 20 watt amplifier, the APS 25 is a rugged, 2-way speaker with a 5.25" shielded woofer and a 1" wide-dispersion tweeter that produces clear detailed sound for all corporate, educational and commercial applications.The APS 25 includes a Master Volume control and Tone control to reduce feedback. Individual level controls for each of the four inputs- two wireless, one wired mic level, and one line level-giving you more ways to configure your system. The speaker's variable line level output lets you daisy chain multiple speakers. The high gain mic input shorts automatically to reduce noise when no mic is plugged in. Included with the APS 25 is the Auto On-Off circuitry triggered by any audio input signal for hands-off system startup; a high impact case for reliability, and dual-voltage(110/220V) switching to facilitate installation and use. The speaker can be used free standing, stand-mounted (5/8x27 threaded holes on the bottom and side) or wall-mounted with the supplied U-mount bracket.The APS 25-RH1 includes a APS-IRII infrared receiver module, an IRH-15c and an IRD-30 external sensor.For pass-around, use the 2-channel IRH-15c infrared handheld uni-directional mic/transmitter. Multiple emitters around the base and near the mic element flood the room.. Product Specifications: REGULAR PRICE: $705.00 Our Low Sale Price: $634.50 Availability: Usually ships the next business day. Azden APS 25-RH1 APS 25-RH1 Speaker Technical Specs Rated Power 20 Watts continuous Frequency Response 65Hz – 18kHz Max SPL @ Rated Output 101db @ 1 meter Woofer 5.25" (133.35mm) high efficiency - magnetically shielded Tweeter 1" (25mm) dome Crossover 1st order passive @ 8kHz Tone Control -6dB/octave sliding low pass (3kHz to 8kHz) Wireless Inputs 2 user-installable receivers VHF (169-213mHz) - 30 fixed frequencies UHF (794-806mHz) - 63 user-selectable frequencies Infrared - 2 fixed frequencies Wired Inputs/Output Mic -81dBv (0.089mVRMS) for 1 watt, 100K balanced, ¼" phone jack, variable Line -40dBv (10mVRMS) for 1 watt, 10K unbalanced, RCA jack, variable Line-Out +15dBv max - RCA jack Weight(w/out receivers) 8.5lb (3.85kg) approx. Dimensions 12.4"H X 7.09"W X 5.6"D (315 X 180 X 142mm) Compliance UL, C-UL, and FCC approved AC Power Requirements User switchable, 110-125 / 210-240VAC - 50Hz/60Hz Included w/speaker Removable wall-mount bracket with 2 screws, rubber anti-rotate pads, removable right-angle, AC cord, 4 self-adhesive anti-skid pads, 4 module screws, 1 or 2 noise-canceling circuit boards (depending on how many modules are installed) Receiver Technical Specs Sub-carrier frequencies 2.06MHz or 2.56MHz Type super heterodyne - crystal controlled Modulation FM Signal-to -Noise >90dB Image rejection >40dB Reception sensitivity >25dBµV Reception selectivity ± 40kHz Audio output adjustment +4dB max Audio output impedance <1k ohms Transmitter Technical Specs Sub-carrier frequencies 2.06MHz & 2.56MHz switchable Modulation FM Microphone element type Uni-directional dynamic Frequency Response 50-8kHz ±3dB Battery type 2-“AA” alkaline( 1.5V x 2 ) or 2-“AA” rechargeable Ni-MH (1.2V x 2 ) Battery life > 6 hours w/alkaline batteries Size 9.65" x approx.1.375" (245 x approx. 35mm) Weight (w/alkaline batteries) 9.1oz (258g) Weight 13.00 lbs Options Available Colors Black, White Azden APS 25-RH2 Product Description: The APS 25-RH2 powered speaker system is a fully self-contained wireless sound reinforcement system with two infrared wireless handheld microphone/transmitters.Incorporating a 20 watt amplifier, the APS 25 is a rugged, 2-way speaker with a 5.25" shielded woofer and a 1" wide-dispersion tweeter that produces clear detailed sound for all corporate, educational and commercial applications.The APS 25 includes a Master Volume control and Tone control to reduce feedback. Individual level controls for each of the four inputs- two wireless, one wired mic level, and one line level-giving you more ways to configure your system. The speaker's variable line level output lets you daisy chain multiple speakers. The high gain mic input shorts automatically to reduce noise when no mic is plugged in. Included with the APS 25 is the Auto On-Off circuitry triggered by any audio input signal for hands-off system startup; a high impact case for reliability, and dual-voltage(110/220V) switching to facilitate installation and use. The speaker can be used free standing, stand-mounted (5/8x27 threaded holes on the bottom and side) or wall-mounted with the supplied U-mount bracket.The APS 25-RH2 includes two APS-IRII infrared receiver modules, two IRH-15c microphones and an IRD-30 external sensor with a special sensor interconnect cable.For pass-around, use the 2-channel IRH-15c infrared handheld uni-directional mic/transmitter. Multiple emitters around the base and near the mic element flood the room. An anti-roll ring around the mic head keeps the IRH-15c from rolling off a sloping lectern or school desk. Product Specifications: REGULAR PRICE: $1,140.00 Our Low Sale Price: $1,026.00 Availability: Usually ships the next business day. Azden APS 25-RH2 APS 25-RH2 Speaker Technical Specs Rated Power 20 Watts continuous Frequency Response 65Hz – 18kHz Max SPL @ Rated Output 101db @ 1 meter Woofer 5.25" (133.35mm) high efficiency - magnetically shielded Tweeter 1" (25mm) dome Crossover 1st order passive @ 8kHz Tone Control -6dB/octave sliding low pass (3kHz to 8kHz) Wireless Inputs 2 user-installable receivers VHF (169-213mHz)- 30 fixed frequencies UHF (794-806mHz)- 63 user-selectable frequencies Infrared- 2 fixed frequencies Wired Inputs/Output Mic -81dBv (0.089mVRMS) for 1 watt, 100K balanced, ¼" phone jack, variable Line -40dBv (10mVRMS) for 1 watt, 10K unbalanced, RCA jack, variable Line-Out +15dBv max - RCA jack Weight(w/out receivers) 8.5lb (3.85kg) approx. Dimensions 12.4"H X 7.09"W X 5.6"D (315 X 180 X 142mm) Compliance UL, C-UL, and FCC approved AC Power Requirements User switchable, 110-125 / 210-240VAC - 50Hz/60Hz Included w/speaker Removable wall-mount bracket with 2 screws, rubber anti-rotate pads, removable right-angle, AC cord, 4 self-adhesive anti-skid pads, 4 module screws, 1 or 2 noise-canceling circuit boards (depending on how many modules are installed) Receiver Technical Specs Sub-carrier frequencies 2.06MHz or 2.56MHz Type super heterodyne - crystal controlled Modulation FM Signal-to -Noise >90dB Image rejection >40dB Reception sensitivity >25dBµV Reception selectivity ± 40kHz Audio output adjustment +4dB max Audio output impedance <1k ohms Transmitter Technical Specs Sub-carrier frequencies 2.06MHz & 2.56MHz switchable Modulation FM Microphone element type Uni-directional dynamic Frequency Response 50-8kHz ±3dB Battery type 2-“AA” alkaline( 1.5V x 2 ) or 2-“AA” rechargeable Ni-MH (1.2V x 2 ) Battery life > 6 hours w/alkaline batteries Size 9.65" x approx.1.375" (245 x approx. 35mm) Weight (w/alkaline batteries) 9.1oz (258g) Weight 15.00 lbs Options Available Colors Black, White Azden APS 25-RL1 Product Description: The APS 25-RL1 powered speaker system is a fully self-contained wireless sound reinforcement system with a single infrared wireless chest-worn transmitter.Incorporating a 20 watt amplifier, the APS 25 is a rugged, 2-way speaker with a 5.25" shielded woofer and a 1" wide-dispersion tweeter that produces clear detailed sound for all corporate, educational and commercial applications.The APS 25 includes a Master Volume control and Tone control to reduce feedback. Individual level controls for each of the four inputs- two wireless, one wired mic level, and one line level-giving you more ways to configure your system. The speaker's variable line level output lets you daisy chain multiple speakers. The high gain mic input shorts automatically to reduce noise when no mic is plugged in. Included with the APS 25 is the Auto On-Off circuitry triggered by any audio input signal for hands-off system startup; a high impact case for reliability, and dual-voltage(110/220V) switching to facilitate installation and use. The speaker can be used free standing, stand-mounted (5/8x27 threaded holes on the bottom and side) or wall-mounted with the supplied U-mount bracket.The APS 25-RL1 includes a APS-IRII infrared receiver module, an IRN-10 chest-worn transmitter with built-in emitter/mic and an IRD-30 external sensor. Product Specifications: REGULAR PRICE: $640.00 Our Low Sale Price: $576.00 Availability: Usually ships the next business day. Azden APS 25-RL1 APS 25-RL1 Speaker Technical Specs Rated Power 20 Watts continuous Frequency Response 65Hz – 18kHz Max SPL @ Rated Output 101db @ 1 meter Woofer 5.25" (133.35mm) high efficiency - magnetically shielded Tweeter 1" (25mm) dome Crossover 1st order passive @ 8kHz Tone Control -6dB/octave sliding low pass (3kHz to 8kHz) Wireless Inputs 2 user-installable receivers VHF (169-213mHz)- 30 fixed frequencies UHF (794-806mHz)- 63 user-selectable frequencies Infrared- 2 fixed frequencies Wired Inputs/Output Mic -81dBv (0.089mVRMS) for 1 watt, 100K balanced, ¼" phone jack, variable Line -40dBv (10mVRMS) for 1 watt, 10K unbalanced, RCA jack, variable Line-Out +15dBv max - RCA jack Weight(w/out receivers) 8.5lb (3.85kg) approx. Dimensions 12.4"H X 7.09"W X 5.6"D (315 X 180 X 142mm) Compliance UL, C-UL, and FCC approved AC Power Requirements User switchable, 110-125 / 210-240VAC - 50Hz/60Hz Included w/speaker Removable wall-mount bracket with 2 screws, rubber anti-rotate pads, removable right-angle, AC cord, 4 self-adhesive anti-skid pads, 4 module screws, 1 or 2 noise-canceling circuit boards (depending on how many modules are installed) Receiver Technical Specs Sub-carrier frequencies 2.06MHz or 2.56MHz Type super heterodyne - crystal controlled Modulation FM Signal-to -Noise >90dB Image rejection >40dB Reception sensitivity >25dBµV Reception selectivity ± 40kHz Audio output adjustment +4dB max Audio output impedance <1k ohms Transmitter Technical Specs Sub-carrier frequencies 2.06MHz & 2.56MHz switchable Modulation FM Microphone element type Uni-directional electret x 2 Frequency response 50-9kHz ±3dB Ext Mic input impedance 2.2k ohms Ext Mic input jack 3.5mm Ext. Mic Voltage/Current 3.5VDC @ 1mA (to power electret mic element) Mic gain adjustment +6dB to approx. –10dB Battery type 2-"AA" Alkaline (1.5V x 2) or 2-"AA" rechargeable Ni-MH (1.2V x 2) Battery life > 8hours w/alkaline batteries Size 3.15" H x 2.75" W x 1.06" D (80 x 70 x 27mm) Weight (w/alkaline batteries) 4.3oz (120g) Weight 13.00 lbs Options Available Colors Black, White Azden APS 25-RL2 Product Description: The APS 25-RL2 powered speaker system is a fully self-contained wireless sound reinforcement system with two infrared wireless chest-worn transmitters.Incorporating a 20 watt amplifier, the APS 25 is a rugged, 2-way speaker with a 5.25" shielded woofer and a 1" wide-dispersion tweeter that produces clear detailed sound for all corporate, educational and commercial applications.The APS 25 includes a Master Volume control and Tone control to reduce feedback. Individual level controls for each of the four inputs- two wireless, one wired mic level, and one line level-giving you more ways to configure your system. The speaker's variable line level output lets you daisy chain multiple speakers. The high gain mic input shorts automatically to reduce noise when no mic is plugged in. Included with the APS 25 is the Auto On-Off circuitry triggered by any audio input signal for hands-off system startup; a high impact case for reliability, and dual-voltage(110/220V) switching to facilitate installation and use. The speaker can be used free standing, stand-mounted (5/8x27 threaded holes on the bottom and side) or wall-mounted with the supplied U-mount bracket.The APS 25-RL12 includes two APS-IRII infrared receiver modules, two IRN-10 chest-worn transmitter with emitter/mics and an IRD-30 external sensor. An included external emitter interconnect cable allows a single sensor to operate both receivers. Product Specifications: REGULAR PRICE: $1,025.00 Our Low Sale Price: $922.50 Availability: Usually ships the next business day. Azden APS 25-RL2 APS 25-RL2 Speaker Technical Specs Rated Power 20 Watts continuous Frequency Response 65Hz – 18kHz Max SPL @ Rated Output 101db @ 1 meter Woofer 5.25" (133.35mm) high efficiency - magnetically shielded Tweeter 1" (25mm) dome Crossover 1st order passive @ 8kHz Tone Control -6dB/octave sliding low pass (3kHz to 8kHz) Wireless Inputs 2 user-installable receivers VHF (169-213mHz)- 30 fixed frequencies UHF (794-806mHz)- 63 user-selectable frequencies Infrared- 2 fixed frequencies Wired Inputs/Output Mic -81dBv (0.089mVRMS) for 1 watt, 100K balanced, ¼" phone jack, variable Line -40dBv (10mVRMS) for 1 watt, 10K unbalanced, RCA jack, variable Line-Out +15dBv max - RCA jack Weight(w/out receivers) 8.5lb (3.85kg) approx. Dimensions 12.4"H X 7.09"W X 5.6"D (315 X 180 X 142mm) Compliance UL, C-UL, and FCC approved AC Power Requirements User switchable, 110-125 / 210-240VAC - 50Hz/60Hz Included w/speaker Removable wall-mount bracket with 2 screws, rubber anti-rotate pads, removable right-angle, AC cord, 4 self-adhesive anti-skid pads, 4 module screws, 1 or 2 noise-canceling circuit boards (depending on how many modules are installed) Receiver Technical Specs Sub-carrier frequencies 2.06MHz or 2.56MHz Type super heterodyne - crystal controlled Modulation FM Signal-to -Noise >90dB Image rejection >40dB Reception sensitivity >25dBµV Reception selectivity ± 40kHz Audio output adjustment +4dB max Audio output impedance <1k ohms Transmitter Technical Specs Sub-carrier frequencies 2.06MHz & 2.56MHz switchable Modulation FM Microphone element type Uni-directional electret x 2 Frequency response 50-9kHz ±3dB Ext Mic input impedance 2.2k ohms Ext Mic input jack 3.5mm Ext. Mic Voltage/Current 3.5VDC @ 1mA (to power electret mic element) Mic gain adjustment +6dB to approx. –10dB Battery type 2-"AA" Alkaline (1.5V x 2) or 2-"AA" rechargeable Ni-MH (1.2V x 2) Battery life > 8hours w/alkaline batteries Size 3.15" H x 2.75" W x 1.06" D (80 x 70 x 27mm) Weight (w/alkaline batteries) 4.3oz (120g) Weight 15.00 lbs Options Available Colors Black, White Azden APS 25-RS1 Product Description: The APS 25-RS1 powered speaker system is a fully self-contained wireless sound reinforcement system with a single infrared wireless chest-worn transmitter and an HS-11 headset/mic.Incorporating a 20 watt amplifier, the APS 25 is a rugged, 2-way speaker with a 5.25" shielded woofer and a 1" wide-dispersion tweeter that produces clear detailed sound for all corporate, educational and commercial applications.The APS 25 includes a Master Volume control and Tone control to reduce feedback. Individual level controls for each of the four inputs- two wireless, one wired mic level, and one line level-giving you more ways to configure your system. The speaker's variable line level output lets you daisy chain multiple speakers. The high gain mic input shorts automatically to reduce noise when no mic is plugged in. Included with the APS 25 is the Auto On-Off circuitry triggered by any audio input signal for hands-off system startup; a high impact case for reliability, and dual-voltage(110/220V) switching to facilitate installation and use. The speaker can be used free standing, stand-mounted (5/8x27 threaded holes on the bottom and side) or wall-mounted with the supplied U-mount bracket.The APS 25-RS1 includes a APS-IRII infrared receiver module, an IRN-10 bodypack with an HS-11 headset/mic and an IRD-30 external sensor. Product Specifications: REGULAR PRICE: $720.00 Our Low Sale Price: $648.00 Availability: Usually ships the next business day. Azden APS 25-RS1 APS 25-RS1 Speaker Technical Specs Rated Power 20 Watts continuous Frequency Response 65Hz – 18kHz Max SPL @ Rated Output 101db @ 1 meter Woofer 5.25" (133.35mm) high efficiency - magnetically shielded Tweeter 1" (25mm) dome Crossover 1st order passive @ 8kHz Tone Control -6dB/octave sliding low pass (3kHz to 8kHz) Wireless Inputs 2 user-installable receivers VHF (169-213mHz)- 30 fixed frequencies UHF (794-806mHz)- 63 user-selectable frequencies Infrared- 2 fixed frequencies Wired Inputs/Output Mic -81dBv (0.089mVRMS) for 1 watt, 100K balanced, ¼" phone jack, variable Line -40dBv (10mVRMS) for 1 watt, 10K unbalanced, RCA jack, variable Line-Out +15dBv max - RCA jack Weight(w/out receivers) 8.5lb (3.85kg) approx. Dimensions 12.4"H X 7.09"W X 5.6"D (315 X 180 X 142mm) Compliance UL, C-UL, and FCC approved AC Power Requirements User switchable, 110-125 / 210-240VAC - 50Hz/60Hz Included w/speaker Removable wall-mount bracket with 2 screws, rubber anti-rotate pads, removable right-angle, AC cord, 4 self-adhesive anti-skid pads, 4 module screws, 1 or 2 noise-canceling circuit boards (depending on how many modules are installed> Receiver Technical Specs Sub-carrier frequencies 2.06MHz or 2.56MHz Type super heterodyne - crystal controlled Modulation FM Signal-to -Noise >90dB Image rejection >40dB Reception sensitivity >25dBµV Reception selectivity ± 40kHz Audio output adjustment +4dB max Audio output impedance <1k ohms Transmitter Technical Specs Sub-carrier frequencies 2.06MHz & 2.56MHz switchable Modulation FM Microphone element type Uni-directional electret x 2 Frequency response 50-9kHz ±3dB Ext Mic input impedance 2.2k ohms Ext Mic input jack 3.5mm Ext. Mic Voltage/Current 3.5VDC @ 1mA (to power electret mic element) Mic gain adjustment +6dB to approx. –10dB Battery type 2-"AA" Alkaline (1.5V x 2) or 2-"AA" rechargeable Ni-MH (1.2V x 2) Battery life > 8hours w/alkaline batteries Size 3.15" H x 2.75" W x 1.06" D (80 x 70 x 27mm) Weight (w/alkaline batteries) 4.3oz (120g) Weight 14.00 lbs Options Available Colors Black, White Azden APS 25-RS2 Product Description: The APS 25-RS2 powered speaker system is a fully self-contained wireless sound reinforcement system with two infrared wireless chest-worn transmitters and an HS-11 headset/mics.Incorporating a 20 watt amplifier, the APS 25 is a rugged, 2-way speaker with a 5.25" shielded woofer and a 1" wide-dispersion tweeter that produces clear detailed sound for all corporate, educational and commercial applications.The APS 25 includes a Master Volume control and Tone control to reduce feedback. Individual level controls for each of the four inputs- two wireless, one wired mic level, and one line level-giving you more ways to configure your system. The speaker's variable line level output lets you daisy chain multiple speakers. The high gain mic input shorts automatically to reduce noise when no mic is plugged in. Included with the APS 25 is the Auto On-Off circuitry triggered by any audio input signal for hands-off system startup; a high impact case for reliability, and dual-voltage(110/220V) switching to facilitate installation and use. The speaker can be used free standing, stand-mounted (5/8x27 threaded holes on the bottom and side) or wall-mounted with the supplied U-mount bracket.The APS 25-RS2 includes two APS-IRII infrared receiver modules, two IRN-10 chest-worn transmitters, an HS-11 headset/mics and an IRD-30 external sensor. An included external emitter interconnect cable allows a single sensor to operate both receivers. Product Specifications: REGULAR PRICE: $1,170.00 Our Low Sale Price: $1,053.00 Availability: Usually ships the next business day. Azden APS 25-RS2 APS 25-RS2 Speaker Technical Specs Rated Power 20 Watts continuous Frequency Response 65Hz – 18kHz Max SPL @ Rated Output 101db @ 1 meter Woofer 5.25" (133.35mm) high efficiency - magnetically shielded Tweeter 1" (25mm) dome Crossover 1st order passive @ 8kHz Tone Control -6dB/octave sliding low pass (3kHz to 8kHz) Wireless Inputs 2 user-installable receivers VHF (169-213mHz)- 30 fixed frequencies UHF (794-806mHz)- 63 user-selectable frequencies Infrared- 2 fixed frequencies Wired Inputs/Output Mic -81dBv (0.089mVRMS) for 1 watt, 100K balanced, ¼" phone jack, variable Line -40dBv (10mVRMS) for 1 watt, 10K unbalanced, RCA jack, variable Line-Out +15dBv max - RCA jack Weight(w/out receivers) 8.5lb (3.85kg) approx. Dimensions 12.4"H X 7.09"W X 5.6"D (315 X 180 X 142mm) Compliance UL, C-UL, and FCC approved AC Power Requirements User switchable, 110-125 / 210-240VAC - 50Hz/60Hz Included w/speaker Removable wall-mount bracket with 2 screws, rubber anti-rotate pads, removable right-angle, AC cord, 4 self-adhesive anti-skid pads, 4 module screws, 1 or 2 noise-canceling circuit boards (depending on how many modules are installed) Receiver Technical Specs Sub-carrier frequencies 2.06MHz or 2.56MHz Type super heterodyne - crystal controlled Modulation FM Signal-to -Noise >90dB Image rejection >40dB Reception sensitivity >25dBµV Reception selectivity ± 40kHz Audio output adjustment +4dB max Audio output impedance <1k ohms Transmitter Technical Specs SSub-carrier frequencies 2.06MHz & 2.56MHz switchable Modulation FM Microphone element type Uni-directional electret x 2 Frequency response 50-9kHz ±3dB Ext Mic input impedance 2.2k ohms Ext Mic input jack 3.5mm Ext. Mic Voltage/Current 3.5VDC @ 1mA (to power electret mic element) Mic gain adjustment +6dB to approx. –10dB Battery type 2-"AA" Alkaline (1.5V x 2) or 2-"AA" rechargeable Ni-MH (1.2V x 2) Battery life > 8hours w/alkaline batteries Size 3.15" H x 2.75" W x 1.06" D (80 x 70 x 27mm) Weight (w/alkaline batteries) 4.3oz (120g) Weight 16.00 lbs Options Available Colors Black, White Azden APS-IRII Product Description: A single-channel infrared plug-in module for the APS Powered Speaker System. Simply plug into the slot on the rear of the speaker. Although the module can use only one channel, both frequencies are built in and can be chosen by adjusting an internal switch. Product Specifications: REGULAR PRICE: $200.00 Our Low Sale Price: $180.00 Availability: Usually ships the next business day. Azden APS-IRII APS-IRII Weight 1.00 lbs Azden BC-29 Product Description: AC/DC recharger for the 320UPR, IRN-10 and IRH-15c. Recharges 2/4 1HR-3U NiMH "AA" batteries while in the transmitter or receiver. Product Specifications: REGULAR PRICE: $35.00 Our Low Sale Price: $31.50 Availability: Usually ships the next business day. Azden BC-29 BC-29 Weight 1.00 lbs Azden IRC-1 Product Description: This cable is used to connect two APS-IR modules to a single IRD-30DC or IRD-60DC. Product Specifications: REGULAR PRICE: $10.00 Our Low Sale Price: $9.00 Availability: Usually ships the next business day. Azden IRC-1 IRC-1 Weight 1.00 lbs Azden IRD-30 Product Description: The IRD-30 is an externally mounted infrared sensor that is used with the APS-IRII receiver. The sensor is fitted with an "F" connector and comes with a mounting bracket. REGULAR PRICE: $75.00 Our Low Sale Price: $67.50 Availability: Usually ships the next business day. Azden IRD-30 IRD-30 Azden IRD-60 Product Description: The IRD-60 is an externally mounted infrared sensor that is used with the IRR-10, IRR-23 receivers and the APS 25 speaker system that has the APS-IRII installed. The sensor is fitted with an "F" connector and comes with a ceiling mounting bracket. REGULAR PRICE: $150.00 Our Low Sale Price: $135.00 Availability: Usually ships the next business day. Azden IRD-60 IRD-60 Azden IRH-15c Product Description: The perfect handheld "pass-around" microphone for student participation, this dual channel microphone/transmitter, operates on the channel that the teacher is not using. It is powered by two "AA" batteries (alkaline or rechargeable - 1HR-3U only) and is compatible with all Azden infrared models. Product Specifications: REGULAR PRICE: $250.00 Our Low Sale Price: $225.00 Availability: Usually ships the next business day. Azden IRH-15c IRH-15c Sub-carrier frequencies 2.06MHz & 2.56MHz switchable Modulation FM Microphone element type Uni-directional dynamic Frequency Response 50-8kHz ±3dB Battery type 2-“AA” alkaline( 1.5V x 2 ) or 2-1HR-3U “AA” rechargeable Ni-MH (1.2V x 2 ) Battery life (w/alkaline batteries) > 6 hours Size 9.65" x approx.1.375" (245 x approx. 35mm) Weight (w/alkaline batteries) 9.1oz (258g) Weight 2.00 lbs Azden IRN-10 Product Description: A lightweight, chest worn, microphone/transmitter, the IRN-10 comes with an adjustable lanyard. It is both a microphone and infrared transmitter which wirelessly "links" the teacher to the IRR-30P receiver. It has a specially designed internal microphone array which provides great sound pick-up. With two switchable channels, a teacher can go from classroom to classroom with the same microphone! With just two "AA" batteries (alkaline or rechargeable 1HR-3U only) the microphone can be used the entire school day without re-charging or changing batteries. Product Specifications: REGULAR PRICE: $185.00 Our Low Sale Price: $166.50 Availability: Usually ships the next business day. Azden IRN-10 IRN-10 Sub-carrier frequencies 2.06MHz & 2.56MHz switchable Modulation FM Microphone element type Uni-directional electret x 2 Frequency response 50-9kHz ±3dB Ext Mic input impedance 2.2k ohms Ext Mic input jack : 3.5mm Ext. Mic Voltage/Current 3.5VDC @ 1mA (to power electret mic element) Mic gain adjustment +6dB to approx. –10dB Battery type 2-"AA" Alkaline (1.5V x 2) or 2-1HR-3U "AA" rechargeable Ni-MH (1.2V x 2) Battery life (w/alkaline batteries) > 8hours Size 3.15" H x 2.75" W x 1.06" D (80 x 70 x 27mm) Weight (w/alkaline batteries) 4.3oz (120g) Weight 1.00 lbs FIND BY BRAND BLOWOUT SPECIALS DJ AMPLIFIERS DJ BOOKS-CD-DVD DJ CABLES DJ CARTRIDGES DJ CASES DJ CD PLAYERS DJ LIGHTING DJ MIXERS DJ OUTBOARD GEAR DJ PACKAGES DJ SPEAKERS DJ TURNTABLES DVD VIDEO PLAYERS MICROPHONES CASSETTE DECKS SOFTWARE PC DJ HEADPHONES KARAOKE GEAR MISCELLANEOUS DJ MONITORS DJ EQUIPMENT Tascam DR-40 home | about us | privacy policy | send email | site map | view cartCopyright ļæ½ 2009 DJShopping.Com. All rights reserved.Consumer Electronics