DJ Shopping for dj equipment can cost you less at DJShopping.com .
Phonic Wireless Sound Reinforcement
Product Description:Complete wireless system for use with active speakers. The WM-SYS4 comes with the WM70 stereo wireless transmitter, WM400-L and WM400-R wireless receivers, power supplies and screws for fastening the WM400 to speaker mounting points. |
Product Overview:
Product Specifications:
| System Specification | |
| RF Carrier Frequency Range | 614 to 865 MHz (conuntry dependent) |
| Frequency Selection | 16 per system, up to 4-6 compatible (country dependent) |
| Audio Frequency Response | 50Hz ~ 18 kHz (+/-3dB) |
| Frequency Stability | ±0.005% |
| Frequency Deviation | ± 40KHz |
| WM70 Wireless Transmitter | Dual Channel Transmitter |
| RF Ouput Power | < 50 mW typical conducted (country dependent) |
| Oscillation Type | PLL synthesized |
| LED Indicators | Power On/Off, Sig/Clip |
| Input Connectors | 2x XLR-1/4" combo electronically balanced |
| Input Impedance | >10 k Ω |
| Maximum Input Level | +8 dBu |
| Power Requirements | 12VDC external power supplier (country dependent) |
| Overall Dimensions | 140 x 43.5 x 179 mm (5.5" x 1.7" x 7") |
| Net Weight | 325 g (0.72 lbs) |
| Opreating Range | 70 m (210 ft.) under optimal conditions |
| Signal-to-Noise Ratio | 100 dB typical (A-weighted) |
| RF Sensitivity | -100 dBm |
| Image Rejection | 75dB |
| T.H.D. | <0.5% @ 1KHz |
| LED indicator | Power On, RF, AF |
| Squelch | Pilot Tone & Noise Cancel |
| Audio Output Connector | XLR |
| Output Impedance | 200 Ω |
| Power Requirement | 12VDC external power supplier (country dependent) |
| Overall Dimensions (WxHxD) | 88.5 x 133 x 36.7 mm (3.5" x 5.2" x 1.4") |
| Net Weight | 145 g (0.32 lbs) | Product Description:Complete wireless system for use with active speakers. The WM-SYS3 comes with the WM60 wireless transmitter, WM400-L wireless receiver, power supplies and screws for fastening the WM400 to speaker mounting points. |
Product Overview:
Product Specifications:
| System Specification | |
| RF Carrier Frequency Range | 614 to 865 MHz (conuntry dependent) |
| Frequency Selection | 16 per system, up to 4-6 compatible (country dependent) |
| Audio Frequency Response | 50Hz ~ 18 kHz (+/-3dB) |
| Frequency Stability | ±0.005% |
| Frequency Deviation | ± 40KHz |
| WM60 Wireless Transmitter | Single Channel Transmitter |
| RF Ouput Power | < 50 mW typical conducted (country dependent) |
| Oscillation Type | PLL synthesized |
| LED Indicators | Sig/Clip |
| Input Connectors | XLR & 1/4" TRS electronically balanced |
| Input Impedance | >10 kΩ |
| Maximum Input Level | +8 dBu |
| Power Requirements | 12VDC external power supplier (country dependent) |
| Overall Dimensions | 98x35x126 mm (2.83" x 1.38" x 4.96") |
| Net Weight | 350 g ( 0.77 lbs) |
| Opreating Range | 70 m (210 ft.) under optimal conditions |
| Signal-to-Noise Ratio | 100 dB typical (A-weighted) |
| RF Sensitivity | -100 dBm |
| Image Rejection | 75dB |
| T.H.D. | <0.5% @ 1KHz |
| LED indicator | Power On, RF, AF |
| Squelch | Pilot Tone & Noise Cancel |
| Audio Output Connector | XLR |
| Output Impedance | 200 Ω |
| Power Requirement | 12VDC external power supplier (country dependent) |
| Overall Dimensions (WxHxD) | 88.5 x 133 x 36.7 mm (3.5" x 5.2" x 1.4") |
| Net Weight | 145 g (0.32 lbs) |
Product Description:Welcome to the World of Wireless. The WM receivers/transmitters for the Performer series of speakers allow users to set up a completely wireless system. Wireless signals can be sent to the Performer speakers with the utmost of ease, and can even be wireless daisy-chained to one another for a more exciting set up. With the WM series of wireless modules, there will be no reason to lay down cables any longer. | |
Product Overview:
Product Specifications:
| System Specification | ||
| RF Carrier Frequency Range | 614 to 865 MHz (conuntry dependent) | |
| Frequency Selection | 16 per system, up to 4-6 compatible (country dependent) | |
| Audio Frequency Response | 50Hz ~ 18 kHz (+/-3dB) | |
| Frequency Stability | ±0.005% | |
| Frequency Deviation | ± 40KHz | |
| WM60 Wireless Transmitter | Single Channel Transmitter | |
| RF Ouput Power | < 50 mW typical conducted (country dependent) | |
| Oscillation Type | PLL synthesized | |
| LED Indicators | Sig/Clip | |
| Input Connectors | XLR & 1/4" TRS electronically balanced | |
| Input Impedance | >10 kΩ | |
| Maximum Input Level | +8 dBu | |
| Power Requirements | 12VDC external power supplier (country dependent) | |
| Overall Dimensions | 98x35x126 mm (2.83" x 1.38" x 4.96") | |
| Net Weight | 350 g ( 0.77 lbs) | Product Description:Welcome to the World of Wireless. The WM receivers/transmitters for the Performer series of speakers allow users to set up a completely wireless system. Wireless signals can be sent to the Performer speakers with the utmost of ease, and can even be wireless daisy-chained to one another for a more exciting set up. With the WM series of wireless modules, there will be no reason to lay down cables any longer. |
Product Overview:
Product Specifications:
| System Specification | |
| RF Carrier Frequency Range | 614 to 865 MHz (conuntry dependent) |
| Frequency Selection | 16 per system, up to 4-6 compatible (country dependent) |
| Audio Frequency Response | 50Hz ~ 18 kHz (+/-3dB) |
| Frequency Stability | ±0.005% |
| Frequency Deviation | ± 40KHz |
| WM70 Wireless Transmitter | Dual Channel Transmitter |
| RF Ouput Power | < 50 mW typical conducted (country dependent) |
| Oscillation Type | PLL synthesized |
| LED Indicators | Power On/Off, Sig/Clip |
| Input Connectors | 2x XLR-1/4" combo electronically balanced |
| Input Impedance | >10 kΩ |
| Maximum Input Level | +8 dBu |
| Power Requirements | 12VDC external power supplier (country dependent) |
| Overall Dimensions | 140 x 43.5 x 179 mm (5.5" x 1.7" x 7") |
| Net Weight | 325 g (0.72 lbs) |
Product Description:Welcome to the World of Wireless. The WM receivers/transmitters for the Performer series of speakers allow users to set up a completely wireless system. Wireless signals can be sent to the Performer speakers with the utmost of ease, and can even be wireless daisy-chained to one another for a more exciting set up. With the WM series of wireless modules, there will be no reason to lay down cables any longer. |
Product Overview:
Product Specifications:
| System Specification | |
| RF Carrier Frequency Range | 614 to 865 MHz (conuntry dependent) |
| Frequency Selection | 16 per system, up to 4-6 compatible (country dependent) |
| Audio Frequency Response | 50Hz ~ 18 kHz (+/-3dB) |
| Frequency Stability | ±0.005% |
| Frequency Deviation | ± 40KHz |
| WM40-L & WM40-R Wireless Receiver For Phonic Performer Speakers | |
| Opreating Range | 50 m (165 ft.) under optimal conditions |
| Signal-to-Noise Ratio | 100 dB typical (A-weighted) |
| RF Sensitivity | -100 dBm |
| Image Rejection | 75dB |
| Receiving Mode | True diversity |
| T.H.D. | <0.5% @ 1KHz |
| LED Indicator | Power On |
| Squelch | Pilot Tone & Noise Cancel |
| Output Impedance | 600Ω |
| Power Requirement | 8-12VDC,300mA |
| Overall Dimensions (WxHxD) | 61 x 25 x 138 mm (2.4" x 1" x 5.43") |
| Net Weight | 145 g (0.32 lbs) | Product Description:Single channel receiver for use with any active speaker. Used with the WM-SYS3 or WM-SYS4.16 selectable UHF preset channels. Available in WM400-L and WM400-R. |
Product Overview:
Product Specifications:
| System Specification | |
| RF Carrier Frequency Range | 614 to 865 MHz (conuntry dependent) |
| Frequency Selection | 16 per system, up to 4-6 compatible (country dependent) |
| Audio Frequency Response | 50Hz ~ 18 kHz (+/-3dB) |
| Frequency Stability | ±0.005% |
| Frequency Deviation | ± 40KHz |
| WM400-L & WM400-R Wireless Receiver For Any Active Speakers | |
| Opreating Range | 70 m (210 ft.) under optimal conditions |
| Signal-to-Noise Ratio | 100 dB typical (A-weighted) |
| RF Sensitivity | -100 dBm |
| Image Rejection | 75dB |
| T.H.D. | <0.5% @ 1KHz |
| LED indicator | Power On, RF, AF |
| Squelch | Pilot Tone & Noise Cancel |
| Audio Output Connector | XLR |
| Output Impedance | 200Ω |
| Power Requirement | 12VDC external power supplier (country dependent) |
| Overall Dimensions (WxHxD) | 88.5 x 133 x 36.7 mm (3.5" x 5.2" x 1.4") |
| Net Weight | 145 g (0.32 lbs) |
